Audi A3 2015(F) Error Code Removal With Auro IM600MAXIIM IM608

Confirmed! Auro IM600 or Autel MaxiIM IM608 Can clear  Audi A3 error code via OBD, with one-key clear, Only takes 2 minutes

Here is the step-by-step guide of Audi A3 Car Error Code Removal with MAXIIM IM608/Auro IM600

First, connect Autel IM608 to the vehicle, enter menu select Diagnostic  function then select “AUDI”

Audi-A3-Car-Error-Code-Removal-with-IM608-1

Accept their disclaimer, then diagnostic program loading, wait a moment …

Audi-A3-Car-Error-Code-Removal-with-IM608-2
Audi-A3-Car-Error-Code-Removal-with-IM608-3
Automatic selection: Device can read automatic VIN number by
OBD after that device will select the car’s system.
Manual selection: If u know car mark, Model and years information u can use this option
System selection: If u know car system, u can select directly car system than
you can read all DTC code
Note: The first automatic selection should be preferred.
Audi-A3-Car-Error-Code-Removal-with-IM608-4

Here select “Automatic selection” to read VIN

Audi-A3-Car-Error-Code-Removal-with-IM608-5

Audi-A3-Car-Error-Code-Removal-with-IM608-6

Read the vehicle info:

Vehicle type: Audi A3 2013>

Vehicle yeas:2015(F)

Then press “YES” to continue

Note: Sometimes it may be necessary to choose according to the vehicle feature.
Audi-A3-Car-Error-Code-Removal-with-IM608-7
Select“Saloon, 4-door”

Audi-A3-Car-Error-Code-Removal-with-IM608-8
Select“CLHA 1.61 TDI/77KW”

Audi-A3-Car-Error-Code-Removal-with-IM608-9

Note:The initial word of the vehicle engine number, the other parts is motor
indicates information.

Diagnosis –automatic selection by can see the all error codes with scan

Select”Diagnosis”

Audi-A3-Car-Error-Code-Removal-with-IM608-10

Select”Auto scan”

then communication status..Wait a moment

Error and Number Errors as below:

Audi-A3-Car-Error-Code-Removal-with-IM608-11

After the code is read out, press “Quick eraser” to clear,only 1 minute

Audi-A3-Car-Error-Code-Removal-with-IM608-12

after the code error clean,press”ESC” to exit and back to the diagnotic menu interface
Audi-A3-Car-Error-Code-Removal-with-IM608-13
Audi-A3-Car-Error-Code-Removal-with-IM608-14
Done! Audi A3 2015(F) Error Code clear via IM608/IM600 is OK!

Be the first to comment

Leave a Reply

Your email address will not be published.


*