Ktag Kess V2 NO 12V (customer solution)

Hi all and thanks all for your responses. Here, i collect working solutions of Ktag or KESS V2 NO 12V. Hope it helps someone out.

Part 1: Cannot get 12v of output from Kess V2
I use a AC power to connect to my kess V2 adapter. The seller gave it. it it 12v and 1A.

When I use my kess I’m following the next steps.

1 ) Connect the adapter to kess unit
2 ) Connect the ac power adapter to the adapter
3 ) Connect the usb cable to kess unit and the computer and tun the software

My kess read ecus by OBD port. I read a seat leon 1.9 BXE perfectly. It is other edc16 ecu.

The Ksuite shows it has 12,16V-12,30V all time while it is trying to read.

I tested my power supply and it give 12 volts



Part 2: Ktag NO 12V

Got a K TAG Clone since a few months. did about 10 ecus with it, no problem! Since today i’ve got no 12 volt on red wires. Normally when i click read 12v appears on red and orange wires. Now only on orange. When i connect red and orange together everything works like normal.

Here is the board with faulty component(s)


Changed this component and it worked.

25-3 25-4

Part 3: Ktag Kess V2 working good with 12V

Ktag Kess V2 with best components works good

Note that Red PCB version works better than Blue & Green versions

Ktag 7.020 maximum quality:


Kess v2 5.017 of maximum quality:


Newest ktag kess v2 red pcb:


Leave a comment

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>