VVDI2 VAG vs. FVDI2 VAG Full Table Comparison

Xhorse VVDI2 or Flyobd FVDI2 (not FVDI 1st generation but 2nd)? I am gonna buy one of these, just don’t know which one would suite me best. I’ll use it for VAG group clusters changing g6/touran/tiguan etc., immo adaptation, making keys, millage correction. Any advice?

5-1

VVDI2 VAG vs FVDI2 VAG:

VVDI2 VAG supports VAG cars: VW, Audi, Seat, Skoda, 4th immobilizer Porsche, 4th immobilizer Bentley.

It works perfect in diagnostic, 4th immobilizer, 5th immobilizer, key learn, BCM remote control, Engine control unit, Kline instrument and immobox, adapt unit, component protection, dump tool etc

FVDI2 VAG supports  VAG cars: VW, Audi, Seat, Skoda VAG-VW, Audi, Seat, Skoda 4th & 5th immobilizer,incl. 4th & 5th immobilizer AUDI A6/Q7, 4th immobilizer Porsche, 4th immobilizer Bentley.

Also, it works good in basic diagnostic, key programming/PIN codes reading, mileage correction, fault codes reading

VAG diagnostic:

5-2

VAG key programming:

5-3

Special functions for VAG:
5-4

From the charts above, FVDI2 FLY and VVDI2 Xhorse almost share the same functions.

They mainly differ in these aspects:

1 OBD read CS/PIN of MED17

2 generate OEM remote control

3 software authorization

FVDI 2 Commander full kit includes software for VAG – VW, Audi, Seat, Skoda; Porsche; Mercedes/Smart/Maybach; OPEL/VAUXHALL; BMW; Peugeot/Citroen; Fiat/Alfa/Lancia; Renault; Toyota/Lexus; Hyundai/KIA; Nissan/Infiniti; TAG Key Tool; Ford; Volvo;Chrysler, Dodge and Jeep; Mitsubishi; DAF; Bikes, Snowmobiles and Water scooters.

VVDI2 full kit includes VK-01 Transponder Programmer, VJ-01 Passthru J2534 and software for VAG – VW, Audi, Seat, Skoda; BMW; PSA (Peugeot/Citroen); Porsche

So, If you looking only for VAG + BMW , then VVDI2 and VVDI Prog is way to go. No need any other tool. In VVDI2 you have also programmer similar to Tango that you can make keys buy dump, but 90% of VAG and BMW can be done by OBD in VVDI2.

VVDI programmer don’t have OBD it’s only for bench programming.

Good for CAS4, FRM, EZS, EWS4 and many more.

CGDI Prog BMW Key Programmer

CGDI Prog BMW MSV80 is an excellent programmer designed for auto diagnostics, programming and security maintenance. Here, i will make clear how to use the CGDI Prog BMW key programmer device.

19-1

Key Programming for BMW CAS1/CAS2/CAS3

Key Matching & All key lost for CAS4 /CAS 4+

Connection: through OBD

Features:

Runs fast with safety

Programs keys for a short time

Module list:

1.BMW CAS1/CAS2/CAS3/CAS3+/key increasing matching,KEY all lost matching,CAS computer replace,CAS3+/P4X above version can directly downgrade by OBD in 5 minus 100% safety.

2.BMW CAS4/CAS4+/Support key matching,support key all lost matching.

3.BMW key inspection,can check key what status in.

4.BMW engine computer DME replacement.

CGDI Prog On Obd2tool.com Car list:

19-2

BMW key programmer for sale:

AK90 key programmer:

read all EWS key information from EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4 system from 1995-2009

AK300+ BMW CAS Key Maker :

only work for BMW from 2002 -2009 years with new BMW CAS,CAS2,CAS3,CAS3+.

YanHua CKM100 key programmer:

Old BMW (EWS2.EWS3.EWS4)

BMW 1/3/5/6/X (E87.E90.E91.E92.E60.E61.E63.E70.E71) series black shell

CAS 2

BMW 1/3/5/6/X (E87.E90.E91.E92.E60.E61.E63.E64.E70.E71) series black shell CAS 3/3+

BMW 7 series E65, E66, CAS

BMW Multi Tool:

work for BMW CAS 1 CAS2 CAS3 CAS3+ CAS4key programmingby OBD2

VVDI2 BMW:

Read/Write EWS, Read CAS information, Read/Write CAS EEPROM,

Read/Write KM stored in CAS, synchronization DME with CAS, synchronization CAS with

ELV, Key Learn(immo), File Make Key, Unlock Key, File Change KM, CAS Repair etc

OBD Flash ISTA version only need 10 minutes. (No extra power. No backup CAS

EEPROM and FLASH)

OBD Function

Support CANBUS100, CANBUS500 and KWP protocol.

Diagnostic CAS information

Key Learn

1) Get Key Info

2) Write Key Info

3) Prepare dealer key with programmer (Support CAS1, CAS2, CAS3,

CAS3+, ISTAP)

4) Prepare dealer key with ignition switch (Support CAS1, CAS2, CAS3,

CAS3+, ISTAP)

5) Program Key info

6) Enable/Disable Key (Support CAS1, CAS3, CAS3, CAS3+, CAS4,

CAS4+)

7) Clear DTC/Shadow

Read/Write CAS EEPROM

Change KM stored in CAS

Read/Write synchronization codes stored in CAS

Synch DME – CAS

Synch CAS – ELV

Read/Write EWS EEPROM

? File Make Key

Support following types:

EWS1

EWS2

EWS3EWS4

CAS1(0K50E)

CAS2(2K79X)

CAS3(0L01Y)

CAS3+(0L15Y/0M23S): Support encrypt version and ISTAP version

CAS4 (F – Series 1L15Y)

CAS4 (F – Series 5M48H): Support CAS4 encrypt version

? File Change KM

Support following types:

EWS3

EWS4

CAS1(0K50E)

CAS2(2K79X)

CAS3(0L01Y)

CAS3+(0L15Y/0M23S)

CAS4 (1L15Y)

CAS4 (5M48H)

M35080(E – Series cluster)

F – Series cluster

? Unlock key

Support unlock key for CAS1/CAS2/CAS3/CAS3+ prepared by VVDI2

? CAS Repair

CAS1 Repair (OBDII)

ISTAP Repair (OBDII)