Original Autel MaxiSys Pro MS908P One year Update Service

Original Autel MaxiSys Pro MS908P MaxiSys Elite MS906 MS906BT One year Update Service

Obd2tool.com provide One year Update Service for Autel Maxisys Pro MS908P Elite MS906 MS906BT MS906TS. We are Autel authorized dealer. Purchasing from us, you will get 100% genuine, one year free update and warranty.

Update Cost:

Autel MaxiSys Elite 1 year online update : $1000 USD

Autel MaxiSys Pro MS908P 1 year online update : $900 USD

Autel MaxiSys MS908 1 year online update : $750 USD

Autel MaxiSys MS906 1 year online update : $550 USD

Autel MaxiSys MS906BT 1 year online update : $550 USD

Autel MaxiSys MS906TS 1 year online update : $650 USD

Autel DS808 DS808Kit 1 Year Online Update : $400 USD

After you place an order on our website and check out, please provide us your device serial number. We will inform you by email after we extend one year update authorization for you or we can send the update license to you via Email. It is so easy to operate, no need shipping.

Features

1.Perfect diagnostic solution for shops and technicians who demand unrivalled smart technology and repairs

2.Extensive vehicle coverage for more than 40 US, Asian and European vehicle makes

3.Compatible with only the Autel MaxiSys Pro MS908P Maxisys MS906 MS906BT MS906TS

Includes

1 Year Software Update for Auto Diagnostic Scanner MS908P MaxiSYS Pro MS908P MS906 MS906BT MS906TS

if your any of your MaxiSys tool is over warrantry for free update, you can buy this service to get update online.

 

http://www.obd2tool.com/article-214-Original+Autel+MaxiSys+Pro+MS908P+One+year+Update+Service.html

(Solved)SD connect interface is Saying “please put in batteries”

Problem:

Hello MB star
I just recieved My tablet and it looks and work Very good .
But The sd connect interface is Saying “please put in batteries”
What type of batteries is it ?

Solution:

This problem same to :

MB Star C4 mux display: Favor inserir baterias(Please insert batteries)

Here you go :

1.Please prepare the following tools:

25-1

①— SDconnect multiplexer which need to input the batteries。

②— 6 units Ni-MH Rechargeable batteries,Size:AA, Voltage:1.2V, Capacity:above 1700mA。

③— 1 unit 108M WIFI Card。

④— Plum screwdriver,Specification:T-20

2.Take out the rubber:

2.1 Use the T20 Plum screwdriver to take out the screws as below.
25-2

2.2 Take out the rubber as below.
25-3

①— Batteries Space.

②— WIFI Card Space.

③— SD Card Space.

3.Insert the Rechargeable batteries.

3.1 Use the T20 Plum screwdriver to take out the screws of Batteries Space fixation as below.
25-4

3.2 Take out the fixation of Batteries Space. Pay attention to the Battery polarity marked in the Batteries Space.
25-5

3.3 Insert the batteries. Note the Battery polarity.
25-6

3.4 Button on the Fixation of Batteries Space after inputting the Rechargeable batteries.
25-7

3.5 Use the T20 Plum screwdriver to fix the screws of Batteries Space fixation as below. Inserting the batteries is finished.

25-8

4.Installing WIFI Card.

4.1 Inserting the WIFI Card into the WIFI Card Space. Please make the correct direction.
25-9

4.2 Push it to make it totally connected.
25-10

4.3 Cover the rubber and fix the screws to finish all the work.

25-11

Note 1:

Go to the info section within DAS Xentry— search SDconnect and you will find what all the SDconnect symbols defined!!
25-12

Note 2:

pls check these picture, you can choose self-diagnosis your MB STAR ScannerSD connect c4

25-13 25-14