Program Subaru Outback 2012 key by SKP1000

Guide to program Subaru Outback 2012 key when all keys lost by using SKP1000 Key Programmer via OBD.

20-1

Key information:

Original key: 3-button straight remote key

Chip: Special 62 chip

Remote frequency: 433MHz

Remote Programming: Manually

Device: SKP1000 tablet car key programmer

Procedure:

Step 1: Manually program remote

Disamble the triangular plate on the left foot of the driver side, close all doors, connect programming connector (single white connector), headlight turns on

20-2

20-3
Keep pressing on the central door lock to ON position, If you hear DI DI DI sound, press on any remote button for 2 twice

20-4

Press the door lock see if it works. If press on any remote key for 2 twice, door lock did not working, try press on any remote button for 4 times. If door lock works, program success. Disconnect programming connector and test the remote.

Step 2: Program immo chip key

Connect Auto Key Programmer SKP1000 car key programmer with vehicle via OBD socket

Turn ignition switch to ON position

Go to Immobilizer function->Select Subaru

20-5

Select Key Type A

20-6
Choose OBDII connector

Turn Ignition ON

Press YES to continue
20-7

Select All key lost

20-8

configuring system

please wait…
20-9

Continue to program next key?

Press YES to continue

20-10

Insert a new key

Turn ignition ON

Press YES to continue

20-11

Configuring…

SKP1000 from OBD2TOOL Program Subaru Outback 2012 key success.

Test the new key.

Done.

Be the first to comment

Leave a Reply

Your email address will not be published.


*