How to add Jeep Wrangler 2013 Remote Key by OBD

Here is the easy guide on programming Jeep Wrangler 2013 2-button straight remote key with ID46 chip by using SKP1000 key programmer via OBD from .

9-1

9-2

Connect SKP1000 Key Programmer with vehicle via OBD diagnosis socket under the dashboard through the main cable

(The menu here is in Chinese, English language is available as well)

9-3
Select Immobilizer system (Straight remote), you have 3 three function options under the menu, Add key, Delete key and read pin code. Add a key requires pin code, delete key does not need.

Here select Add a key
9-4

SKP-1000 key programmer at Obd2tool.com will read pin code via OBD automatically

9-5

Insert the key to be programmed

Turn ignition switch to ON position

9-6
Manually enter security code read previously

Follow skp 1000 prompt

Program success.

If need to program second key, select Add a key and repeat above procedure.

OBD2 key programmer SKP1000 will generate remote control automatically after program completed.

Note: You can also use 3 buttons straight remote key to add a key on this model. But need delete lost key data fist